ISO 8434-1 (E) - 2018
Display drawing:
Screw Thread | 5 | 6 | 8 | 6 | 10 | 12 | 15 | 18 | 22 | 28 | 35 | 42 | 6 | 8 | 10 | 12 | 16 | 20 | 25 | 30 | 38 | 4 | 8 | ||
Tube Outer Diamter | 5 | 6 | 8 | 6 | 10 | 12 | 15 | 18 | 22 | 28 | 35 | 42 | 6 | 8 | 10 | 12 | 16 | 20 | 25 | 30 | 38 | 4 | 8 | ||
Series | LL | LL | LL | L | L | L | L | L | L | L | L | L | S | S | S | S | S | S | S | S | S | LL | L | ||
D | Size | M10×1 | M10×1 | M12×1 | M12×1.5 | M16×1.5 | M18×1.5 | M22×1.5 | M26×1.5 | M30×2 | M36×2 | M45×2 | M52×2 | M14×1.5 | M16×1.5 | M18×1.5 | M20×1.5 | M24×1.5 | M30×2 | M36×2 | M42×2 | M52×2 | M8×1 | M14×1.5 | |
D | D | 10 | 10 | 12 | 12 | 16 | 18 | 22 | 26 | 30 | 36 | 45 | 52 | 14 | 16 | 18 | 20 | 24 | 30 | 36 | 42 | 52 | 8 | 14 | |
P | 1 | 1 | 1 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 2 | 2 | 2 | 2 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 2 | 2 | 2 | 2 | 1 | 1.5 | ||
D1 | Nominal Size | 3.5 | 4.5 | 6 | 4 | 8 | 10 | 12 | 15 | 19 | 24 | 30 | 36 | 4 | 5 | 7 | 8 | 12 | 16 | 20 | 25 | 32 | 3 | 6 | |
D1 | Max | 3.6 | 4.6 | 6.1 | 4.1 | 8.2 | 10.2 | 12.2 | 15.2 | 19.2 | 24.2 | 30.3 | 36.3 | 4.1 | 5.2 | 7.2 | 8.2 | 12.2 | 16.2 | 20.2 | 25.2 | 32.3 | 3.1 | 6.1 | |
D1 | Min | 3.4 | 4.4 | 5.9 | 3.9 | 7.8 | 9.8 | 11.8 | 14.8 | 18.8 | 23.8 | 29.7 | 35.7 | 3.9 | 4.8 | 6.8 | 7.8 | 11.8 | 15.8 | 19.8 | 24.8 | 31.7 | 2.9 | 5.9 | |
I | Min | 6 | 6 | 7 | 7 | 8 | 8 | 9 | 9 | 10 | 10 | 12 | 12 | 9 | 9 | 9 | 9 | 11 | 12 | 14 | 16 | 18 | 6 | 7 | |
L | ±0.3 | 15 | 15 | 17 | 19 | 22 | 24 | 28 | 31 | 35 | 38 | 45 | 51 | 23 | 24 | 25 | 29 | 33 | 37 | 42 | 49 | 57 | 15 | 21 | |
S | Forged | Min | 9 | 9 | 12 | 12 | 14 | 17 | 19 | 24 | 27 | 36 | 41 | 50 | 12 | 14 | 17 | 17 | 24 | 27 | 36 | 41 | 50 | 9 | 12 |
S | Machined From Barstock | Max | 11 | 11 | 12 | 12 | 17 | 19 | None | None | None | None | None | None | 14 | 17 | 19 | 22 | None | None | None | None | None | 9 | 14 |
A | Ref | 9.5 | 9.5 | 11.5 | 12 | 15 | 17 | 21 | 23.5 | 27.5 | 30.5 | 34.5 | 40 | 16 | 17 | 17.5 | 21.5 | 24.5 | 26.5 | 30 | 35.5 | 41 | 11 | 14 |